Air Filters for Air-conditioning, Vendilation, Clean Rooms & All Industries Applications

 

FP-40

RIGID WELDED POCKET FILTER UNIT

SPECIFICATION
High grade synthetic fiber superfine thermal bonded rigid fleece, welded into stiff  pockets for easy assembly in either galvanized metal or plastic incinerable frame configurations. Aerodynamically designed and equipped with full-media-utilizing spot welded spacers, tapered form with a welded vertical third pocket bottom seam. 

Rigid pockets ensure preservation of the dust cake formed during pocket life enhancing air filter efficiency gradually while in use. Sudden increases in pressure loss, dust break-through, dust unloading and pocket degradation is prevented. No stitching, no glue and absence of fibre break-off with extremely high burst strength and integrity.

 

APPLICATION AREAS

  • Heavy and metal industry
  • Chemical plants
  • Public arenas
  • Pharmaceutical and food industry
  • Optical and electronic industry
  • Co-generation utility plants
  • Manufacturing plants of all kind
  • Paint spray plants
  • Pre filtration and recycling of exhaust air


PHYSICAL CHARACTERISTICS AND PERFORMANCE DATA, ACC. ASHRAE/ANSI 52.1
(based on standard pocket filter size (595mm x 595mm / 24" x 24" ) front frame; and 360mm/14" pocket depth and 6 pocket configuration)

 

Air Filter test data sheet
Test method: EN 779 / ASHRAE 52-76

Clean device
Air Flow rate vs. resistance

Pressure drop and Arrestance vs. dust fed

Deep Bed Air Filter SYN-PAC FP-30 FP-40 FP-50 FP-60 FP-70 FP-80

Panel Filters | Extended Surface
Semi Absolute & Hepa Filter | Grease Filters
Aluminium Filters | Activated Carbon Absorber Filters | Roll Filters



66, Jalan TPP1/19,
Taman Industri Puchong, Batu 12, Jalan Puchong,
47100 Puchong, Selangor D.E. Malaysia.

Tel :603-8060 3343, 8060 3357
 Fax :603-8060 3359, 8060 3360
 Email: info@betterair.com.my