RIGID WELDED POCKET FILTER UNIT |
SPECIFICATION
Rigid pockets ensure preservation of the dust cake formed during pocket life enhancing air filter efficiency gradually while in use. Sudden increases in pressure loss, dust break-through, dust unloading and pocket degradation is prevented. No stitching, no glue and absence of fibre break-off with extremely high burst strength and integrity.
APPLICATION AREAS
|
|
PHYSICAL CHARACTERISTICS AND PERFORMANCE DATA, ACC. ASHRAE/ANSI 52.1
(based on standard pocket filter size (595mm x 595mm / 24" x 24" ) front frame; and 600mm/24" pocket depth and 6 pocket configuration) |
Air Filter test data sheet
Test method: EN 779 / ASHRAE 52-76
Clean device
Air Flow rate vs. resistance
Pressure drop and Arrestance vs. dust fed
Deep Bed Air Filter | SYN-PAC | FP-30 | FP-40 | FP-50 | FP-60 | FP-70 | FP-80 |
Panel
Filters | Extended Surface
Semi Absolute & Hepa Filter | Grease Filters
Aluminium Filters | Activated
Carbon Absorber Filters | Roll Filters
66, Jalan TPP1/19, Taman Industri Puchong, Batu 12, Jalan Puchong, 47100 Puchong, Selangor D.E. Malaysia. |
Tel :603-8060 3343, 8060
3357 |