Applications
The Ultra-Cell filter provides high efficiency filtration where
clean air environment is a necessity. This includes Hospital,
Laboratories, Office Buildings, Food and Beverage Processing Plants,
etc. Filter performance is not significantly affected by changing air
velocity or repeated fan shutdown making it the ideal filter choice for
variable volume systems. The Ultra-Cell makes upgrading of an existing
filtration system simple. The Ultra-Cell can be easily installed where
lower efficiency filters no longer meet your filtration needs.
Design &
Construction
Each Ultra-Cell filter is constructed of high strength water resistant
glass micro-fiber paper in a pleated design. A corrugated aluminium
separator is placed between each pleated from touching. This allows free
flow of air into and through the filter. The separators also add
rigidity to the construction. The front and rear edges of the separators
are rolled over to eliminate sharp edges that could damage the media
during shipping and handling. The media pack is installed into a heavy
24 ga galvanized steel enclosure frame. A sealant is then applied to
provide a positive seal between the media and the frame. Optional face
guards are available on the air entering or air leaving sides of the
filter upon request. The Ultra-Cell is classified by Underwriters
Laboratories as U.L. Class 1.
The Ultra-Cell can be
installed into a filter bank of Rutzler Fl-4 filter holding frames. The
FL-4 holding frames will accommodate either the single header, double
header or no header style of Ultra-Cell. A pre-filter used in
conjunction with the Ultra-Cell can significantly prolong the life of
the filter. There is a Rutzler fastener you are working with.
|